Limited 2 year warranty from manufacture defects.
Warranty of defects due to manufacturing and or assembly.
PowerBridge Product Model #’s:
SSPBIW – TSPBIW – ONE-CK – TWO-CK – TSCK – TSCK2 – SBCK – SWCK – LP2D – LP3D – ONE-PRO – TWO-PRO – SBPR – SWPR
LIMITED WARRANTY: HD-Products, Inc. (HD Products PowerBridge) warrants to this product will be free from defects in workmanship or materials for a period of two-years from the date of purchase.
EXCLUSIVE REMEDY: If product is determined defective, HD Products shall remedy with replacement of such parts found as defective. Labor cost associated to remove and replace is not covered within this Limited Warranty. HD Products may require defective parts to be returned at sender’s expense. Replacement parts will be sent at HD Products expense not to exceed standard mailing cost within the US and Canada. Request for remedy requires a Replacement or Return Authorization from HD Products and proof of purchase. Contact Customer Service for further information. Maximum claim liability, not to exceed the product purchase price or Manufacturers Suggested List Retail Price.
EXCLUSIONS/CONDITIONS: This warranty does not cover and not limited to, misuse, acts of nature, verbal and written expression and improper installation. Improper installation is determined such to include, but not limited to, non-code compliant installation, product modifications, alterations, adjustments, and connections using non-code compliant methods and or materials.
DISCLAIMER: In no event will HD-Products, Inc. the Manufacturer, it’s agents, suppliers, affiliates, resellers, have any liability for any incidental or consequential damages related to products sold, offered, installed.
This warranty extends to all users, concurrent and recurrent, with and or without knowledge of manufacturer of products manufactured, assembled and marketed by HD-Products, Inc.
Warranty Claims must be made directly to HD-Products, Inc. within the 2 year period with proof of purchase from seller.
Maximum claim liability not to exceed the purchase price.
Claims must be made in writting.
Important Product Information
THIS PRODUCT IS LISTED AS A “IN WALL ELECTRICAL APPLIANCE” IT IS NOT TO BE INSTALLED AS, DIRECT WIRED OR BRANCHED TO THE BUILDING ELECTRICAL CIRCUIT/WIRING SYSTEM !
INSTALL THIS PRODUCT ONLY AS AN “IN WALL ELECTRICAL APPLIANCE” EXTENSION PLUG-IN DEVICE TO AN EXISTING, A/C GROUNDED OUTLET TO ENERGIZE A/C POWER USING A UL/CSA LISTED PLUG-IN POWER SUPPLY CORD SET (AWG 14 or 16 GROUND CORD) PRODUCT IS TO ONLY BE INSTALLED WITH SPECIFIED CODE COMPLIANT BUILDING ELECTRICAL WIRE 12/2 or 14/2 NM-TYPE or MC-TYPE.
THIS PRODUCT MUST BE INSTALLED TO A UL CLASSIFIED SINGLE GANG ELECTRICAL JUNCTION BOX TO MEET CODE COMPLIANCY AND TO ASSURE SAFETY. THE SUPPLIED NON-METALLIC JUNCTION BOXES MAY NOT MEET SOME LOCAL CODE REQUIREMENTS, AS METAL JUNCTION BOXES MAY BE REQUIRED FOR CERTAIN INSTALLATIONS.
MANUFACTURER IS NOT LIABLE FOR DAMAGES DUE TO IMPROPER INSTALLATION METHODS NOT FOLLOWED HEREIN OR AS REQUIRED BY NATIONAL OR LOCAL CODE. Installation to meet Code Compliancy is the responsibility of user and or installer and not of the Manufacturer or it’s agents.
Please read and understand all instructions. Follow WARNING and CAUTION labels on the product. Use 12-2 or 14-2 copper wire only with this product. THIS PRODUCT IS RATED TO USE WITH AN EXISTING A/C OUTLET 125v GROUNDED CIRCUIT ONLY. FOR SHOCK PROTECTION, DO NOT INSTALL THIS PRODUCT TO A NON-GROUNDED OUTLET/SYSTEM.
Do not install this product near water, example, near a sink, tub, shower, swimming pool or laundry area.
Install this product to meet National Electrical Code and or State/Local Building Code as to requirements for installing electrical building wire and outlets as a single BRIDGE EXTENSION, without direct modification or alteration to the building electrical circuits.
Meets National Electrical Code 2014 Article 400.7(A)(11)
If you are not skilled with running wires through walls; consult a qualified professional to install this product.
This product does not have built-in electronic circuitry for surge protection or A/C filtering.
It is recommended that this product be connected to a quality surge-protector/power conditioner for equipment protection.